소개

Often times power cords can get damaged through long-term use, or mishandling of the device. Whatever the case, the power cord of the Porter-Cable PC60TAG can be replaced in a few easy steps.

부품

부품은 필요하지 않습니다.

  1. Using the Phillips #2 screwdriver, remove the 3/4" Phillips head screw on the back cover.
    • Using the Phillips #2 screwdriver, remove the 3/4" Phillips head screw on the back cover.

    • Unplug the grinder before disassembling.

  2. Holding the front of the device, carefully slide the back cover over the cord.
    • Holding the front of the device, carefully slide the back cover over the cord.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Using the Phillips #2 screwdriver, remove the two 1/2" Phillips head screws securing the cord grip.
    • Using the Phillips #2 screwdriver, remove the two 1/2" Phillips head screws securing the cord grip.

  5. Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.
    • Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

  6. Careful remove each wire from the power cord from underneath the terminals.
    • Careful remove each wire from the power cord from underneath the terminals.

결론

To reassemble your device, follow these instructions in reverse order.

Mackenzie Fairbanks

회원 가입일: 2016년 03월 24일

528 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 UMass Dartmouth, Team 2-2, Isaacson Spring 2016 회원

UMASSD-ISAACSON-S16S2G2

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 8

전체 시간: 185