주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Power Mac G4 Quicksilver Optical Drive Disassembly

필요한 것

  1. Power Mac G4 Quicksilver Optical Drive Disassembly, Opening the case: 1 단계, 이미지 1/1
    • The handle to open your computer is located on top of the right side panel.

  2. Power Mac G4 Quicksilver Optical Drive Disassembly: 2 단계, 이미지 1/2 Power Mac G4 Quicksilver Optical Drive Disassembly: 2 단계, 이미지 2/2
    • Grab the circular handle and pull outward.

  3. Power Mac G4 Quicksilver Optical Drive Disassembly: 3 단계, 이미지 1/1
    • Your computer is now open and ready for repair.

  4. Power Mac G4 Quicksilver Optical Drive Disassembly, Power Mac G4 Quicksilver Optical Drive Disassembly: 4 단계, 이미지 1/1
    • The optical drive is in the top left corner of the case.

  5. Power Mac G4 Quicksilver Optical Drive Disassembly: 5 단계, 이미지 1/2 Power Mac G4 Quicksilver Optical Drive Disassembly: 5 단계, 이미지 2/2
    • There are four screws to be removed.

    • The first screw can be seen in the first picture.

    • The remaining three screws can be seen in the second picture.

  6. Power Mac G4 Quicksilver Optical Drive Disassembly: 6 단계, 이미지 1/1
    • Remove the optical drive by pulling the drive away from the front of the computer and out.

  7. Power Mac G4 Quicksilver Optical Drive Disassembly: 7 단계, 이미지 1/1
    • Detach the two cables attached to the back of the drive.

    • The flat ribbon cable can be detached by pulling the silver tab. The multicolored cable can be removed by grasping the plastic connector on either side and pulling with substantial force.

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Jacob Garcia

회원 가입일: 01/28/10

621 평판

안내서 2개 작성하였습니다

Cal Poly, Team 14-41, Regan Winter 2010 Cal Poly, Team 14-41, Regan Winter 2010 회원

CPSU-REGAN-W10S14G41

4 회원들

안내서 17개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 17

전체 시간: 5,608