주요 콘텐츠로 건너뛰기

Power Mac G4 Quicksilver video adapter card replacement

필요한 것

  1. Power Mac G4 Quicksilver video adapter card replacement, Opening the case: 1 단계, 이미지 1/1
    • The handle to open your computer is located on top of the right side panel.

  2. Power Mac G4 Quicksilver video adapter card replacement: 2 단계, 이미지 1/2 Power Mac G4 Quicksilver video adapter card replacement: 2 단계, 이미지 2/2
    • Grab the circular handle and pull outward.

  3. Power Mac G4 Quicksilver video adapter card replacement: 3 단계, 이미지 1/1
    • Your computer is now open and ready for repair.

  4. Power Mac G4 Quicksilver video adapter card replacement, Video Adapter: 4 단계, 이미지 1/1
    • This is your Power Mac G4's video adapter.

  5. Power Mac G4 Quicksilver video adapter card replacement: 5 단계, 이미지 1/1
    • Start by removing the screw holding the card to the chassis as shown.

  6. Power Mac G4 Quicksilver video adapter card replacement: 6 단계, 이미지 1/1
    • Before lifting the card out, this small plastic tab needs to be pulled back there by releasing it entirely.

  7. Power Mac G4 Quicksilver video adapter card replacement: 7 단계, 이미지 1/2 Power Mac G4 Quicksilver video adapter card replacement: 7 단계, 이미지 2/2
    • With the tab and screw removed, lift the card straight out.

    • When putting the card back in, take care to apply even pressure across the top with your thumbs. This will avoid damaging the card.

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

Cameron Christensen

회원 가입일: 01/20/10

590 평판

안내서 3개 작성하였습니다

Cal Poly, Team 14-41, Regan Winter 2010 Cal Poly, Team 14-41, Regan Winter 2010 회원

CPSU-REGAN-W10S14G41

4 회원들

안내서 17개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 9

전체 시간: 4,122