주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Power Macintosh G3 Blue and White RAM Replacement

필요한 것

  1. Power Macintosh G3 Blue and White RAM Replacement, RAM: 1 단계, 이미지 1/1
    • Unfortunately, I am unable to provide OG content for this step due to my PowerMac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals of the Power Mac.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  2. Power Macintosh G3 Blue and White RAM Replacement: 2 단계, 이미지 1/1
    • Push the white tabs next to where your RAM is located away form the RAM chip itself.

    • The RAM chips should move up a tad and become somewhat loose.

    • Your RAM configuration may vary. This process is done the exact same way no matter what your RAM placement looks like.

  3. Power Macintosh G3 Blue and White RAM Replacement: 3 단계, 이미지 1/2 Power Macintosh G3 Blue and White RAM Replacement: 3 단계, 이미지 2/2
    • Pull the RAM chips out of the RAM slots.

    • That's all folks! That wasn't too hard, was it?

    • Second image: RAM remains

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

[deleted]

회원 가입일: 08/28/18

26,409 평판

안내서 21개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 16

전체 시간: 947