주요 콘텐츠로 건너뛰기

PowerA Enhanced Wireless Controller Motherboard Replacement

필요한 것

  1. PowerA Enhanced Wireless Controller Motherboard Replacement, Motherboard: 1 단계, 이미지 1/3 PowerA Enhanced Wireless Controller Motherboard Replacement, Motherboard: 1 단계, 이미지 2/3 PowerA Enhanced Wireless Controller Motherboard Replacement, Motherboard: 1 단계, 이미지 3/3
    • Remove the battery cover by pressing down on the lever located on the top of the cover.

    • Apply pressure until it clicks out of place, and pull it off.

  2. PowerA Enhanced Wireless Controller Motherboard Replacement: 2 단계, 이미지 1/1
    • Remove all eight screws using the J0 screwdriver.

  3. PowerA Enhanced Wireless Controller Motherboard Replacement: 3 단계, 이미지 1/2 PowerA Enhanced Wireless Controller Motherboard Replacement: 3 단계, 이미지 2/2
    • Insert the iFixit opening tool into the seam and gently pry the cover plate up.

    • Remove the cover plate once it is loosened.

  4. PowerA Enhanced Wireless Controller Motherboard Replacement: 4 단계, 이미지 1/3 PowerA Enhanced Wireless Controller Motherboard Replacement: 4 단계, 이미지 2/3 PowerA Enhanced Wireless Controller Motherboard Replacement: 4 단계, 이미지 3/3
    • Remove all three screws securing the motherboard using the J00 screwdriver.

    • Remove the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Alberto Del Calvo Lopez

회원 가입일: 10/10/19

227 평판

안내서 1개 작성함

USF Tampa, Team S1-G5, Leahy Fall 2019 USF Tampa, Team S1-G5, Leahy Fall 2019 회원

USFT-LEAHY-F19S1G5

3 회원들

안내서 10개 작성하였습니다

댓글 한 개

Je cherche un couvercle de batterie pour ma manette switch

Auriez-vous un site où il est possible de s’en procurer un ?

Merci

josselin cornet - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 15

30일 전: 50

전체 시간: 2,817