주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide will show you how to take apart your controller to help you access the input buttons in order to replace them. Sometimes there may be something stuck under them and all you need to do is simply remove them and clean them out.

부품

지정된 부품이 없습니다.

  1. Disassemble the case by removing the 8 screws, indicated in red on the picture, that hold the back of the case to the front of the case using a J0 screwdriver. Disassemble the case by removing the 8 screws, indicated in red on the picture, that hold the back of the case to the front of the case using a J0 screwdriver.
    • Disassemble the case by removing the 8 screws, indicated in red on the picture, that hold the back of the case to the front of the case using a J0 screwdriver.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  3. The case should come apart easily. If not, use a spudger to pry the back from the front of the case. The case should come apart easily. If not, use a spudger to pry the back from the front of the case.
    • The case should come apart easily. If not, use a spudger to pry the back from the front of the case.

  4. Using a pair of tweezers, remove each button and replace it with a new one. A Button B Button
    • Using a pair of tweezers, remove each button and replace it with a new one.

    • A Button

    • B Button

    • X Button

    • Y Button

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Rachel Ferreira

회원 가입일: 2016년 10월 20일

269 평판

안내서 1개 작성함

UMass Dartmouth, Team 3-1, Isaacson Fall 2016 UMass Dartmouth, Team 3-1, Isaacson Fall 2016 회원

UMASSD-ISAACSON-F16S3G1

3 회원들

안내서 1개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 39

전체 시간: 1,155