주요 콘텐츠로 건너뛰기

PowerBook 180 Modem Replacement

필요한 것

  1. PowerBook 180 Modem Replacement, Modem: 1 단계, 이미지 1/2 PowerBook 180 Modem Replacement, Modem: 1 단계, 이미지 2/2
    • Remove the Ni-Cad battery from the PowerBook 180.

    • Slide the arrows toward the front of the computer until the battery can slide out.

  2. PowerBook 180 Modem Replacement: 2 단계, 이미지 1/2 PowerBook 180 Modem Replacement: 2 단계, 이미지 2/2
    • Removing the screws securing the bottom plate from the PowerBook 180.

    • There are 5 Torx T8 screws, 4 of which are located on the bottom and 1 on the back above the modem port.

  3. PowerBook 180 Modem Replacement: 3 단계, 이미지 1/2 PowerBook 180 Modem Replacement: 3 단계, 이미지 2/2
    • Your computer should look like the two pictures after the bottom plate is removed.

  4. PowerBook 180 Modem Replacement: 4 단계, 이미지 1/2 PowerBook 180 Modem Replacement: 4 단계, 이미지 2/2
    • Locate the modem board, which is next to the DC-in port.

    • There are two Torx T8 screws marked in red in the pictures. Remove these screws and pull up on the modem board to remove.

    • To reassemble your PowerBook, follow these instructions in reverse.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Jack Byrnes

회원 가입일: 10/17/10

1,244 평판

안내서 2개 작성하였습니다

Master Techs Master Techs 회원

Community

322 회원들

안내서 2,520개 작성하였습니다

댓글 한 개

Great guide. Worked for me of the Powerbook 140. Thanks!

Jack - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 1,608