기기를 수리하세요 커뮤니티 상점

PowerBook G3 Lombard Heat Shield Replacement

소개

Removing the heat shield enables access to the RAM and the processor below.

필요한 것

  1. PowerBook G3 Lombard Heat Shield Replacement, Keyboard: 1 단계, 이미지 1/1

    • Turn the computer so that the ports are facing you.

    • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

    번역하기

  2. PowerBook G3 Lombard Heat Shield Replacement: 2 단계, 이미지 1/1

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

    번역하기

  4. PowerBook G3 Lombard Heat Shield Replacement: 3 단계, 이미지 1/1

    • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

    • In order to replace the keyboard, you must first remove the modem.

    번역하기

  5. PowerBook G3 Lombard Heat Shield Replacement, Heat Shield: 4 단계, 이미지 1/1

    • Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

    번역하기

  6. PowerBook G3 Lombard Heat Shield Replacement: 5 단계, 이미지 1/1

    • Lift the heat shield up and pull it toward you.

    번역하기

  7. PowerBook G3 Lombard Heat Shield Replacement: 6 단계, 이미지 1/1

    • Your laptop should look approximately like this.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

첨부 문서

작성자

다른 기여자 1명과 함께

iRobot

회원 가입일: 09/24/09

1 평판

안내서 636개 작성하였습니다

배지: 36

배지 +33개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 2,536