주요 콘텐츠로 건너뛰기

소개

Install an Airport Extreme 802.11g card internally.

부품

  1. Use a coin to turn the battery locking screw 90 degrees clockwise.
    • Use a coin to turn the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

  2. Flip down the door on the right side of the battery compartment.
    • Flip down the door on the right side of the battery compartment.

  3. Use a spudger or flathead screwdriver to disconnect the Airport antenna from the card.
    • Use a spudger or flathead screwdriver to disconnect the Airport antenna from the card.

  4. Grasp the plastic tab and pull the card out all the way.
    • Grasp the plastic tab and pull the card out all the way.

결론

To reassemble your device, follow these instructions in reverse order.

다른 14명이 해당 안내서를 완성하였습니다.

첨부 문서

iRobot

회원 가입일: 2009년 09월 24일

1 평판

안내서 624개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 15

전체 시간: 16,718