주요 콘텐츠로 건너뛰기
PowerBook G4 Titanium DVI Keyboard Replacement

PowerBook G4 Titanium DVI Keyboard Replacement

iRobot

iRobot3 다른 기여자

최종 수정일 March 18, 2018

예상시간 없음
쉬움

Replacing this keyboard is easy and takes only a few minutes.

필요한 것

  1. PowerBook G4 Titanium DVI Keyboard Replacement, Battery: 1 단계, 이미지 2개 중 1개 PowerBook G4 Titanium DVI Keyboard Replacement, Battery: 1 단계, 이미지 2개 중 2개
    • Locate the battery release tab on the underside of the G4.

    • Slide the battery release tab to the left and lift the battery out of the computer.

  2. PowerBook G4 Titanium DVI Keyboard Replacement, Keyboard: 2 단계, 이미지 1개 중 1개
    • Turn the keyboard locking screw located in the middle of the keyboard so that it is parallel to the space bar. A half turn from parallel to parallel will unlock it. Another half turn will lock it again.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  3. PowerBook G4 Titanium DVI Keyboard Replacement: 3 단계, 이미지 1개 중 1개
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  4. PowerBook G4 Titanium DVI Keyboard Replacement: 4 단계, 이미지 1개 중 1개
    • Your laptop should look approximately like this.

결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

첨부 문서

작성자

3다른 기여자 명과 함께

iRobot

회원 가입일: 09/24/09

1 평판

안내서 636개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 4

지난 30일: 22

전체 시간: 10,765