기기를 수리하세요 커뮤니티 상점

PowerLead Puto PLD003 Back Buttons Replacement

소개

This guide shows how to remove the screws that hold the camera together, how to remove the side panel from the camera, how to remove the back panel, and how to replace the back buttons.

필요한 것

  1. PowerLead Puto PLD003 Back Buttons Replacement, Side Panel: 1 단계, 이미지 1/1

    • Slide the battery eject button open to release the battery door.

    번역하기

  2. PowerLead Puto PLD003 Back Buttons Replacement: 2 단계, 이미지 1/1

    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

    번역하기

  3. PowerLead Puto PLD003 Back Buttons Replacement: 3 단계, 이미지 1/1

    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

    번역하기

  5. PowerLead Puto PLD003 Back Buttons Replacement: 4 단계, 이미지 1/1

    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

    번역하기

  6. PowerLead Puto PLD003 Back Buttons Replacement, Back Buttons: 5 단계, 이미지 1/2 PowerLead Puto PLD003 Back Buttons Replacement, Back Buttons: 5 단계, 이미지 2/2

    • Remove the three 4 mm Phillips #1 screws holding the weight.

    • Remove the weight.

    번역하기

  7. PowerLead Puto PLD003 Back Buttons Replacement: 6 단계, 이미지 1/1

    • Remove the two 4 mm Phillips #1 screws holding the back panel in place.

    번역하기

  8. PowerLead Puto PLD003 Back Buttons Replacement: 7 단계, 이미지 1/1

    • Apply pressure to the back panel, away from the camera to remove.

    번역하기

  9. PowerLead Puto PLD003 Back Buttons Replacement: 8 단계, 이미지 1/2 PowerLead Puto PLD003 Back Buttons Replacement: 8 단계, 이미지 2/2

    • Place the back panel so the buttons are facing down and the circuit board is facing up.

    • Remove the three 4 mm Phillips #1 screws holding the circuit board in place.

    번역하기

  10. PowerLead Puto PLD003 Back Buttons Replacement: 9 단계, 이미지 1/1

    • Set aside the circuit board.

    • These nubs are what is currently holding the buttons in place.

    • Carefully apply pressure and remove the set of buttons from the nubs.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Justin Tew

회원 가입일: 03/31/16

767 평판

안내서 7개 작성하였습니다

배지: 13

배지 +10개 더

팀

Eastern Washington University, Team 1-2, Giguere Spring 2016 Eastern Washington University, Team 1-2, Giguere Spring 2016 회원

EWU-GIGUERE-S16S1G2

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 6

전체 시간: 151