소개

Prying the exterior housing takes some force but is not difficult. If you are replacing the speaker unit, pry off the upper half.

부품

부품은 필요하지 않습니다.

    • Pry the exterior housing off the iHome iP37. You may need extra leverage to do this.

    • Note: This step is the most difficult due to the way it is attached. The glue holding the exterior housing to the internals does not break easily. You may want to use iFixit's iOpener to soften the glue.

    • Note: The process is the same for both the upper half and the lower half. To identify the halves, look for these details: the upper half has a metal grid, and the lower half has buttons. If you are replacing any other components, pry off the lower half.

    댓글 쓰기

  1. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
결론

To reassemble your device, apply double-sided tape or adhesive on the existing glue and fit the housing back on.

Jerrell

회원 가입일: 2014년 04월 23일

725 평판

안내서 7개 작성하였습니다

Cal Poly, Team 11-50, Amido Spring 2014 Cal Poly, Team 11-50, Amido Spring 2014 회원

CPSU-AMIDO-S14S11G50

4 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 186