Presidential Footrest Disassembly - iFixit 수리 안내서

필요한 것

1 단계 Step 1

Presidential Footrest Disassembly, Step 1: 1 단계, 이미지 1/1

Be sure footrest is on a surface that wont scratch the bottom.
Remove the 9 screws on the plastic cover.
The Orange circle is the screw that holds the bracket in place . this screw does have a bushing on it DO NOT LOSE IT.
Cut zip tie on cable bundle .

2 단계 Step 2

Presidential Footrest Disassembly, Step 2: 2 단계, 이미지 1/1

Tilt Footrest forward and remove 3 Bottom screws.

3 단계 Step 3

Presidential Footrest Disassembly, Step 3: 3 단계, 이미지 1/1

Remove screws on left and right wheel and remove wheels from assembly .
Be sure to put wheels in safe place to avoid any damage.

4 단계 Complete

Presidential Footrest Disassembly, Complete: 4 단계, 이미지 1/1

WHEN PULLING OFF THE COVER THE CABLE BUNDLE WILL NEED TO BE THREADED THROUGH THE CUT OUT ON THE COVER. DO NOT FORCE IT. THIS MAY RESULT IN DAMAGING THE CONNECTORS .
You're done ! from here you have complete access to extend mechanism and valve.

결론

To reassemble your device, follow these instructions in reverse order. DON'T FORGET TO REPLACE ANY CUT ZIP TIES

작성자

다른 기여자 1명과 함께

Nick

회원 가입일: 05/30/17

2,737 평판

안내서 16개 작성하였습니다

+1개 배지 추가

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 21