기기를 수리하세요 커뮤니티 상점

Proscan Tablet Touch Screen Replacement

필요한 것

  1. Proscan Tablet Touch Screen Replacement, Touch Screen: 1 단계, 이미지 1/1

    • Tools necessary for task.

    • Starting from the left to right

    • Metal Spudyer

    • Plastic opening tool

    • Precision tweezer

    • Point pen tool

    • Driver with bit size J0

    번역하기

  2. Proscan Tablet Touch Screen Replacement: 2 단계, 이미지 1/1

    • The backing of the tablet is fastened by simply snapping it in. Using the metal opening tool, pry between the plastic backing and the edge, but do not remove it yet. Work your way around until you have them separated.

    번역하기

  3. Proscan Tablet Touch Screen Replacement: 3 단계, 이미지 1/1

    • Once you have finished going around the edges of the tablet, look inside.

    번역하기

  4. Proscan Tablet Touch Screen Replacement: 4 단계, 이미지 1/1

    • You will notice two wires still connecting the backing to the computer. These are for the speakers.

    번역하기

  6. Proscan Tablet Touch Screen Replacement: 5 단계, 이미지 1/1

    • You can remove the speakers with your hands to free the backing completely.

    번역하기

  7. Proscan Tablet Touch Screen Replacement: 6 단계, 이미지 1/1

    • Next the following highlighted spots are screws. These screws must be loosened to separate the motherboard and digitizer from the outer glass components. Remember lefty loosely, righty tighty. All screws were placed on a magnet board to ensure they did not roll away

    번역하기

  8. Proscan Tablet Touch Screen Replacement: 7 단계, 이미지 1/1
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • There is some tape wire that links the screen to the grey digitizer. This can be gently pulled apart by the tweezers

    번역하기

  9. Proscan Tablet Touch Screen Replacement: 8 단계, 이미지 1/1

    • Next focus on the camera and volume components along the edges highlighted here. The screws have already been taken out, gently pull them off.

    번역하기

  10. Proscan Tablet Touch Screen Replacement: 9 단계, 이미지 1/1

    • Gently lift the green motherboard from the grey digitizer to ensure that all screws have been removed. The only connection remaining should be a tape wire to the battery.

    번역하기

  11. Proscan Tablet Touch Screen Replacement: 10 단계, 이미지 1/1

    • The last step is to remove the grey digitizer from the screen entirely. Note that the blue battery and green motherboard will still be attached, move them as one part

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Cameron Denny

회원 가입일: 10/23/15

321 평판

안내서 2개 작성하였습니다

배지: 6

배지 +3개 더

팀

University of Memphis, Team 3-3, Kim Fall 2015 University of Memphis, Team 3-3, Kim Fall 2015 회원

UM-KIM-F15S3G3

4 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 25

전체 시간: 5,567