Protocol Galileo Stealth Propeller Replacement - iFixit 수리 안내서

소개

This guide will walk you through how to remove the motor propeller from the drone. This is a very simple process, and minimal tooling is required. This guide is useful for replacing blades that may have been damaged.

필요한 것

1 단계 Propeller

Protocol Galileo Stealth Propeller Replacement, Propeller: 1 단계, 이미지 1/1

Remove the chrome shaft cover by lightly pulling it away from the drone.

2 단계

Protocol Galileo Stealth Propeller Replacement: 2 단계, 이미지 1/1

Using a Phillips #000 screwdriver, remove the 7mm screw from the propeller stop.
Be sure to apply adequate pressure when removing the screw to prevent stripping it out.

3 단계

Protocol Galileo Stealth Propeller Replacement: 3 단계, 이미지 1/1

Remove the propeller stop from shaft by lightly pulling it away from the drone.

4 단계

Protocol Galileo Stealth Propeller Replacement: 4 단계, 이미지 1/1

Remove the propeller from shaft by lightly pulling it away from the drone.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

stephen R masalewicz

회원 가입일: 02/15/18

270 평판

안내서 2개 작성하였습니다

배지 +4개 더

팀

UW Stout, Team S8-G4, Ogden Spring 2018 UW Stout, Team S8-G4, Ogden Spring 2018 회원

UWSTOUT-OGDEN-S18S8G4

4 회원들

안내서 6개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 3

전체 시간: 364