주요 콘텐츠로 건너뛰기

소개

Use this guide to disconnect the battery from the your Protocol TerraCopter Evo. You will need to flip your drone upside down then unlock the battery cover by pulling the plastic trigger down and open it then remove it by disconnect it from the drone's cable.

도구

지정된 도구가 없습니다.

부품

  1. Pull down the battery cover on the bottom of the drone and open it. Pull down the battery cover on the bottom of the drone and open it.
    • Pull down the battery cover on the bottom of the drone and open it.

  2. Pull the battery out of the battery slot. Disconnect the red battery cable from the device. Disconnect the red battery cable from the device.
    • Pull the battery out of the battery slot.

    • Disconnect the red battery cable from the device.

  3. Remove the battery from the device.
    • Remove the battery from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Tri Luong

회원 가입일: 2018년 01월 17일

327 평판

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 16

전체 시간: 174