기기를 수리하세요 커뮤니티 상점

Protocol Videodrone AP Battery Wiring Replacement

소개

This guide will show you how to replace the battery and the soldering new wires to the motherboard. This is guide includes a highly recommend soldering guide. CAUTION: Soldering iron will be hot and may cause minor burns if handles improperly.

필요한 것

  1. Protocol Videodrone AP Battery Wiring Replacement, Battery Wiring: 1 단계, 이미지 1/1

    • Make sure the drone is turned off

    편집

  2. Protocol Videodrone AP Battery Wiring Replacement: 2 단계, 이미지 1/1

    • Open the hatch and carefully pull out the battery to expose the cable connection

    편집

  3. Protocol Videodrone AP Battery Wiring Replacement: 3 단계, 이미지 1/2 Protocol Videodrone AP Battery Wiring Replacement: 3 단계, 이미지 2/2

    • Carefully pull apart the cable connection

    편집

  5. Protocol Videodrone AP Battery Wiring Replacement: 4 단계, 이미지 1/2 Protocol Videodrone AP Battery Wiring Replacement: 4 단계, 이미지 2/2

    • Unscrew the 4 screws from the bottom of the drone.

    • Unscrew the 8 screws connecting the propeller guards to the drone

    • Unscrew the four propeller screws.

    • One screw is hidden behind the screwdriver.

    편집

  6. Protocol Videodrone AP Battery Wiring Replacement: 5 단계, 이미지 1/1

    • Carefully remove faulty battery wiring from the drone

    편집

  7. Protocol Videodrone AP Battery Wiring Replacement: 6 단계, 이미지 1/1

    • Feed through opening using tweezers to grasp the wire and carefully pull through.

    편집

  8. Protocol Videodrone AP Battery Wiring Replacement: 7 단계, 이미지 1/1

    • Use the soldering iron to solder new wires to mother board. CAUTION: Soldering iron may get hot and cause minor burns if handled improperly.

    • Use this guide for how to solder: https://www.youtube.com/watch?v=QKbJxytE...

    편집

  9. Protocol Videodrone AP Battery Wiring Replacement: 8 단계, 이미지 1/1

    • Reattach the battery and test for power by turning on the drone and look for the 4 LEDs turn on.

    편집
결론

All Done!

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Serge

회원 가입일: 09/26/17

340 평판

안내서 3개 작성하였습니다

배지: 8

배지 +5개 더

팀

USF Tampa, Team S2-G1, Passmore Fall 2017 USF Tampa, Team S2-G1, Passmore Fall 2017 회원

USFT-PASSMORE-F17S2G1

4 회원들

안내서 3개 작성하였습니다

댓글 3개

Great explanation. Just wondering where to get the replacement piece. My drone has the black wire hanging by a single strand just outside the white connector. The red wire is in tact but I would need the whole part that attaches to the board and extends outside the drone to connect the battery to. Thanks

yasureok - 답글

Was wondering i think its charging the blue light flashes when plugged in but wont turn on. Wires look brand new

Michael Landry - 답글

I’m wondering the same thing, mine lights up blue when charging, wires look good but still no action.

Ryann Hunter -

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 11

전체 시간: 1,768