기기를 수리하세요 커뮤니티 상점

RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement

필요한 것

  1. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: 1 단계, 이미지 1/3 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: 1 단계, 이미지 2/3 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Backplate: 1 단계, 이미지 3/3

    • Remove the three Phillips #00 screws at the bottom of the device.

    편집

  2. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 2 단계, 이미지 1/2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 2 단계, 이미지 2/2

    • Remove the two Phillips #00 screws to the left and right of the keyboard connector.

    편집

  3. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 3 단계, 이미지 1/1

    • Pull on one of the bottom corners to begin to pull off the back plate.

    편집

  4. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 4 단계, 이미지 1/2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 4 단계, 이미지 2/2

    • Work around the outside of the chassis, using the spudger to pry the backplate off.

    • After doing this for about half the device, the backplate should pop right off.

    편집

  5. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Battery: 5 단계, 이미지 1/1

    • Remove the tape over the connectors on the motherboard and other side of the battery.

    편집

  7. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 6 단계, 이미지 1/1

    • Disconnect the red and black keyboard wires connecting the battery to the motherboard.

    편집

  8. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 7 단계, 이미지 1/1

    • Disconnect the black ribbon cable running over the battery. Flip up the black clamp and pull the cable out.

    편집

  9. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 8 단계, 이미지 1/2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 8 단계, 이미지 2/2

    • Remove the cable over the battery connecting the motherboard and the power connector.

    • Flip up the black clamp and pull the cable out.

    편집

  10. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 9 단계, 이미지 1/2 RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 9 단계, 이미지 2/2

    • Pull out battery. It is taped to the device so it is safe to pull out.

    • Look for damage to the battery. If damaged, make sure to not get any acid on your fingers.

    편집

  11. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Antenna: 10 단계, 이미지 1/1

    • Identify the grey wire on the right side of the device.

    편집

  12. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 11 단계, 이미지 1/1

    • Remove the orange ribbon cable over the wire.

    편집

  13. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 12 단계, 이미지 1/1

    • Remove the antenna using a soldering iron.

    편집

  14. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement, Motherboard: 13 단계, 이미지 1/1

    • Remove the blue and black wire from the top of the motherboard.

    편집

  15. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 14 단계, 이미지 1/1

    • Remove the screws from the motherboard.

    편집

  16. RCA 10 Viking Pro RCT6K03W13 Motherboard Replacement: 15 단계, 이미지 1/1

    • Remove the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Marcus Elysee

회원 가입일: 10/25/19

97 평판

안내서 1개 작성함

배지: 2

팀

UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 UMass Dartmouth, Team S1-G8, O'Connell Fall 2019 회원

UMASSD-O'CONNELL-F19S1G8

3 회원들

안내서 4개 작성하였습니다

댓글 한 개

Where can I buy this motherboard?

waymond everett - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 23

전체 시간: 1,352