기기를 수리하세요 커뮤니티 상점

RIDGID R860052 Direction of Rotation Selector Replacement

소개

If your drill continues to turn in an opposite direction you desire or does not turn at all, this guide will provide you guidance to the process of replacing the dysfunctional direction of rotation selector in a RIDGID R860052.

필요한 것

  1. RIDGID R860052 Direction of Rotation Selector Replacement, Direction of Rotation Selector: 1 단계, 이미지 1/2 RIDGID R860052 Direction of Rotation Selector Replacement, Direction of Rotation Selector: 1 단계, 이미지 2/2

    • Remove the battery from the drill before you begin.

    • Use a T10 Torx screwdriver to remove the ten screws on the information label side of the drill.

    • These ten screws are 19 mm long.

    편집

  3. RIDGID R860052 Direction of Rotation Selector Replacement: 2 단계, 이미지 1/1

    • Lift off and remove the cover with the informational label.

    편집

  4. RIDGID R860052 Direction of Rotation Selector Replacement: 3 단계, 이미지 1/3 RIDGID R860052 Direction of Rotation Selector Replacement: 3 단계, 이미지 2/3 RIDGID R860052 Direction of Rotation Selector Replacement: 3 단계, 이미지 3/3

    • Lift up the switch assembly.

    • Unhook the rotation selector from the drill cover and replace with a new one.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Anna Wu

회원 가입일: 02/04/19

273 평판

안내서 2개 작성하였습니다

배지: 8

배지 +5개 더

팀

UC Davis, Team S18-G4, Lore Winter 2019 UC Davis, Team S18-G4, Lore Winter 2019 회원

UCD-LORE-W19S18G4

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 237