기기를 수리하세요 커뮤니티 상점

RIDGID R860052 Motor Replacement

소개

If your drill does not turn on with a fully charged battery, the motor of your drill might be damaged. This guide will provide guidance to the process of replacing a defective motor in a RIDGID R860052.

필요한 것

  1. RIDGID R860052 Motor Replacement, Motor: 1 단계, 이미지 1/2 RIDGID R860052 Motor Replacement, Motor: 1 단계, 이미지 2/2

    • Remove the battery from the drill before you begin.

    • Use a T10 Torx screwdriver to remove the ten screws on the information label side of the drill.

    • These ten screws are 19 mm long.

    편집

  2. RIDGID R860052 Motor Replacement: 2 단계, 이미지 1/1

    • Lift off and remove the cover with the informational label.

    편집

  4. RIDGID R860052 Motor Replacement: 3 단계, 이미지 1/3 RIDGID R860052 Motor Replacement: 3 단계, 이미지 2/3 RIDGID R860052 Motor Replacement: 3 단계, 이미지 3/3

    • Remove the switch assembly, chuck, and motor from all drill covers.

    편집

  5. RIDGID R860052 Motor Replacement: 4 단계, 이미지 1/2 RIDGID R860052 Motor Replacement: 4 단계, 이미지 2/2

    • Twist the chuck and motor in the opposite direction and gently pull them apart.

    편집

  6. RIDGID R860052 Motor Replacement: 5 단계, 이미지 1/3 RIDGID R860052 Motor Replacement: 5 단계, 이미지 2/3 RIDGID R860052 Motor Replacement: 5 단계, 이미지 3/3

    • Desolder the black and red wires from the motor.

    • Replace motor and resolder the black and red wires back onto the motor.

    • Be aware of the heat level of the metal part on the soldering tool.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Andrea Hernandez

회원 가입일: 02/05/19

204 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

UC Davis, Team S18-G4, Lore Winter 2019 UC Davis, Team S18-G4, Lore Winter 2019 회원

UCD-LORE-W19S18G4

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 6

전체 시간: 475