기기를 수리하세요 커뮤니티 상점

Razer Huntsman Tournament Edition Port Replacement

소개

If your port is either wobbly or non-functional, use this guide to replace it. This guide should take a half hour.

The Razer Huntsman Tournament Edition is a tenkeyless mechanical keyboard. Its USB port is easily swappable, being held in by a screw and a cable.

You must know how to remove the back of the keyboard before beginning this guide.

필요한 것

  1. Razer Huntsman Tournament Edition Port Replacement, Keycaps: 1 단계, 이미지 1/1

    • Place the unplugged keyboard on a flat, clean surface appropriate for working on.

    편집

  2. Razer Huntsman Tournament Edition Port Replacement: 2 단계, 이미지 1/2 Razer Huntsman Tournament Edition Port Replacement: 2 단계, 이미지 2/2

    • Grip the keycap with your keycap puller.

    • You can remove keycaps with your fingers if you don’t have a puller, but the adjacent keycaps must be removed first for sufficient grip.

    편집

  3. Razer Huntsman Tournament Edition Port Replacement: 3 단계, 이미지 1/3 Razer Huntsman Tournament Edition Port Replacement: 3 단계, 이미지 2/3 Razer Huntsman Tournament Edition Port Replacement: 3 단계, 이미지 3/3

    • Pull with an upwards force to remove the keycap.

    • Take a moment to clean the area that was previously obscured if it’s dirty.

    • Use gentle force so as not to damage the stabilizers.

    편집

  4. Razer Huntsman Tournament Edition Port Replacement, Chassis: 4 단계, 이미지 1/1

    • Remove all of the keycaps with a keycap puller.

    편집

  6. Razer Huntsman Tournament Edition Port Replacement: 5 단계, 이미지 1/2 Razer Huntsman Tournament Edition Port Replacement: 5 단계, 이미지 2/2

    • Unscrew the thirteen 6.5 mm screws, using the Phillips #0 screwdriver, that are located in the front panel.

    편집

  7. Razer Huntsman Tournament Edition Port Replacement: 6 단계, 이미지 1/1

    • Use an opening tool to pry open the chassis.

    • Be careful not to use excessive force during this step so the plastic doesn't warp or break.

    편집

  8. Razer Huntsman Tournament Edition Port Replacement: 7 단계, 이미지 1/1

    • Gently lift the front panel off.

    • The front panel should be connected to the USB board. Do not tug the panel off as this may damage other parts.

    편집

  9. Razer Huntsman Tournament Edition Port Replacement: 8 단계, 이미지 1/1

    • Disconnect the internal cable.

    편집

  10. Razer Huntsman Tournament Edition Port Replacement, Port: 9 단계, 이미지 1/2 Razer Huntsman Tournament Edition Port Replacement, Port: 9 단계, 이미지 2/2

    • Unscrew the board with the port.

    • It should be located on the upper left, held in by two 6.5mm Phillips #0 screws.

    • Move the cable out of the way for the second screw

    편집

  11. Razer Huntsman Tournament Edition Port Replacement: 10 단계, 이미지 1/1

    • Detach the internal cable from the USB board.

    • Do this carefully.

    편집

  12. Razer Huntsman Tournament Edition Port Replacement: 11 단계, 이미지 1/1

    • Remove the USB board.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Joseph O'Dowd

회원 가입일: 10/25/22

383 평판

안내서 3개 작성하였습니다

배지: 9

배지 +6개 더

팀

UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 UMass Dartmouth, Team 4-3, Sinclaire Fall 2022 회원

UMASSD-SINCLAIRE-F22S4G3

5 회원들

안내서 7개 작성하였습니다

댓글 한 개

how do i get a new port and where

Guardian Suit - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 6

전체 시간: 293