Skip to main content

소개

This guide will help you replace the top outer casing of the mouse that holds some of the electronics for the LED lighting. Be sure to use caution when unplugging the wires, for this could result in the mouse not working properly. Also use caution when removing the plastic shell, it is fragile and it could be cracked upon removal.

부품

No parts specified.

  1. Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.
    • Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

  2. Remove the four 7mm screws using a Phillips head #00 screwdriver.
    • Remove the four 7mm screws using a Phillips head #00 screwdriver.

  3. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  4. Gently remove the top plastic plate of the mouse.
    • Gently remove the top plastic plate of the mouse.

    • Unplug the white cord from the circuit board.

  5. Lightly pull the two plastic sides of the mouse to remove them.
    • Lightly pull the two plastic sides of the mouse to remove them.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Gianni Conti

회원 가입일: 2018년 01월 29일

377 평판

안내서 2개 작성하였습니다

University of Alabama, Team S1-G2, Bedsole Spring 2018 University of Alabama, Team S1-G2, Bedsole Spring 2018 회원

UA-BEDSOLE-S18S1G2

4 회원들

안내서 5개 작성하였습니다

do you know where i can get a new top body section? i have a molten that stopped left clicking on every click, i opened it up and the plastic pretty much was worn away

pipsqueak642 - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 5

지난 30일: 28

전체 시간: 461