기기를 수리하세요 커뮤니티 상점

RedOctane X-Plorer Rear Case Replacement

작성자 Riley (또 다른 기여자 6명)
  • 댓글 0
  • 즐겨찾기 0

난이도

쉬움

단계

3

소요 시간

15 분

섹션

1

플래그

0

소개

To access the internal components of the guitar and diagnose problems, you must remove the rear case. This guide will demonstrate how to remove the rear case properly.

도구

부품

지정된 부품이 없습니다.

  1. Remove the strap by pulling it off of the mounts located on the body and neck. Remove the strap by pulling it off of the mounts located on the body and neck.

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    편집

  3. Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver. Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver. These screws can also be Torx on some models.

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    편집

  4. Remove the five 12mm Phillips #1 screws along the neck with a screwdriver. Pull off the top shell of the neck to expose the internal features. Pull off the top shell of the neck to expose the internal features.

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

Riley

회원 가입일: 2018년 04월 18일

649 평판

안내서 7개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team S17-G1, Livingston Spring 2018 Cal Poly, Team S17-G1, Livingston Spring 2018 회원

CPSU-LIVINGSTON-S18S17G1

3 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 5

30일 전: 12

전체 시간: 349