기기를 수리하세요 커뮤니티 상점

RedOctane X-Plorer Strum Bar Replacement

소개

The guitar strings often catch on the plastic case or wear over time. This guide demonstrates how to access the internal components of the strings and diagnose hidden problems.

필요한 것

  1. RedOctane X-Plorer Strum Bar Replacement, Rear Case: 1 단계, 이미지 1/2 RedOctane X-Plorer Strum Bar Replacement, Rear Case: 1 단계, 이미지 2/2

    • Remove the strap by pulling it off of the mounts located on the body and neck.

    편집

  2. RedOctane X-Plorer Strum Bar Replacement: 2 단계, 이미지 1/3 RedOctane X-Plorer Strum Bar Replacement: 2 단계, 이미지 2/3 RedOctane X-Plorer Strum Bar Replacement: 2 단계, 이미지 3/3

    • Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.

    • Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.

    • These screws can also be Torx on some models.

    • Pull off the rear case.

    편집

  4. RedOctane X-Plorer Strum Bar Replacement: 3 단계, 이미지 1/3 RedOctane X-Plorer Strum Bar Replacement: 3 단계, 이미지 2/3 RedOctane X-Plorer Strum Bar Replacement: 3 단계, 이미지 3/3

    • Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.

    • Pull off the top shell of the neck to expose the internal features.

    편집

  5. RedOctane X-Plorer Strum Bar Replacement, Strum Bar: 4 단계, 이미지 1/1

    • Using two hands, gently remove the two string rod fixtures.

    편집

  6. RedOctane X-Plorer Strum Bar Replacement: 5 단계, 이미지 1/1

    • Lift up on the strum bar to remove it from the guitar.

    편집

  7. RedOctane X-Plorer Strum Bar Replacement: 6 단계, 이미지 1/2 RedOctane X-Plorer Strum Bar Replacement: 6 단계, 이미지 2/2

    • Remove the string rod by gently pulling it out of the strum bar.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Jared McMullen

회원 가입일: 04/18/18

276 평판

안내서 1개 작성함

배지: 8

배지 +5개 더

팀

Cal Poly, Team S17-G1, Livingston Spring 2018 Cal Poly, Team S17-G1, Livingston Spring 2018 회원

CPSU-LIVINGSTON-S18S17G1

3 회원들

안내서 9개 작성하였습니다

댓글 2개

I had a squeaking strum bar so I followed this guide to dismantle and clean the parts. Other than the one step missed in the guide it was easy to follow. It also stopped the squeaking!

Zachary Avery - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 10

30일 전: 42

전체 시간: 3,563