기기를 수리하세요 커뮤니티 상점

Refrigerator Handle with No Drills Installation

보관된 가이드
해당 안내서는 단지 역사적인 목적으로 보관됩니다. 최신 버전 안내서를 사용하여 수리 하십시오.

소개

Have you recently broken the handle of your fridge, but don't want to go through the hassle of drilling holes and screwing in bolts? Well, with this guide you will be able to avoid that issue and properly install a cheap and mess free handle.

필요한 것

  1. Refrigerator Handle with No Drills Installation, Refrigerator Handle with No Drills Installation: 1 단계, 이미지 1/3 Refrigerator Handle with No Drills Installation, Refrigerator Handle with No Drills Installation: 1 단계, 이미지 2/3 Refrigerator Handle with No Drills Installation, Refrigerator Handle with No Drills Installation: 1 단계, 이미지 3/3

    • Use a clean sponge or damp lint free cloth to apply the handle to the surface.

    • Soapy water or other mild cleansers may be used to clean the surface from all grease or grime.

    • Preferably use cold or luke warm water.

    편집

  2. Refrigerator Handle with No Drills Installation: 2 단계, 이미지 1/3 Refrigerator Handle with No Drills Installation: 2 단계, 이미지 2/3 Refrigerator Handle with No Drills Installation: 2 단계, 이미지 3/3

    • Gently clean the surface of refrigerator where handle will be applied.

    • Ensure the surface is completely dry before application.

    편집

  3. Refrigerator Handle with No Drills Installation: 3 단계, 이미지 1/3 Refrigerator Handle with No Drills Installation: 3 단계, 이미지 2/3 Refrigerator Handle with No Drills Installation: 3 단계, 이미지 3/3

    • Clean the bottom of the handle's suction cups with a damp sponge or lint-free towel.

    • Ensure the surface is completely dry up before application.

    편집

  5. Refrigerator Handle with No Drills Installation: 4 단계, 이미지 1/1

    • Once both surfaces are dry, place the handle with suction cups facing the refrigerator.

    • Position the handle on the side you would open the refrigerator.

    편집

  6. Refrigerator Handle with No Drills Installation: 5 단계, 이미지 1/1

    • Position the handle vertically and at an appropriate height.

    • The height is up to your own personal preference.

    편집

  7. Refrigerator Handle with No Drills Installation: 6 단계, 이미지 1/2 Refrigerator Handle with No Drills Installation: 6 단계, 이미지 2/2

    • Apply pressure to both ends of the handle for approximately 15 seconds.

    편집

  8. Refrigerator Handle with No Drills Installation: 7 단계, 이미지 1/3 Refrigerator Handle with No Drills Installation: 7 단계, 이미지 2/3 Refrigerator Handle with No Drills Installation: 7 단계, 이미지 3/3

    • Lock the suction cups in place by pushing down on the hatches.

    • Depending on manufacturer, locking the suction handles may differ in method.

    편집

  9. Refrigerator Handle with No Drills Installation: 8 단계, 이미지 1/2 Refrigerator Handle with No Drills Installation: 8 단계, 이미지 2/2

    • Slowly release the handle.

    • If handle detaches, repeat steps 4-8 until successful.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Jaskaran Buttar

회원 가입일: 09/29/15

125 평판

안내서 1개 작성함

배지: 3

팀

Cal Poly, Team 10-7, Green Fall 2015 Cal Poly, Team 10-7, Green Fall 2015 회원

CPSU-GREEN-F15S10G7

3 회원들

안내서 3개 작성하였습니다

댓글 한 개

Help to fix a big hole where the door is holding on door falling off

Joya Hall - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 260