주요 콘텐츠로 건너뛰기

소개

Remove the main fan from the case.

부품

지정된 부품이 없습니다.

  1. Pull on outer latch. Lower door until it is level with your work surface.
    • Pull on outer latch.

    • Lower door until it is level with your work surface.

    • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

  2. Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver. The fan housing will still be connected to the computer by a power cable which will be removed in the next step.
    • Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.

    • The fan housing will still be connected to the computer by a power cable which will be removed in the next step.

  3. Remove the power cable from the fan and detach bracing.
    • Remove the power cable from the fan and detach bracing.

결승점

다른 2명이 해당 안내서를 완성하였습니다.

Justin Petrilli

회원 가입일: 2010년 01월 21일

3,030 평판

안내서 11개 작성하였습니다

Cal Poly, Team 13-24, Maness Winter 2010 Cal Poly, Team 13-24, Maness Winter 2010 회원

CPSU-MANESS-W10S13G24

4 회원들

안내서 25개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 5,192