Removing Audio Technica ATH-AD500 Foam Disks - iFixit 수리 안내서

소개

This installation guide will help you with the following:

removing foam disk
decreasing the bass

필요한 것

1 단계 Speaker Assembly

Removing Audio Technica ATH-AD500 Foam Disks, Speaker Assembly: 1 단계, 이미지 1/1

Remove the ear pads by peeling them away from the grill.

2 단계

Removing Audio Technica ATH-AD500 Foam Disks: 2 단계, 이미지 1/1

Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

3 단계

Removing Audio Technica ATH-AD500 Foam Disks: 3 단계, 이미지 1/1

Remove the speaker from the grill by pulling it out.
Remove the speaker carefully so you do not rip the wires out.

4 단계 Foam Disks

Removing Audio Technica ATH-AD500 Foam Disks, Foam Disks: 4 단계, 이미지 1/2

Removing Audio Technica ATH-AD500 Foam Disks, Foam Disks: 4 단계, 이미지 2/2

Remove the foam disk from the grill by peeling it away from the grill.
During reassembly, make sure that the speaker is angled into your ear canal.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 8명과 함께

Melanie Reis

회원 가입일: 01/11/13

227 평판

안내서 5개 작성하였습니다

배지 +10개 더

팀

Cal Poly, Team 17-19, Forte Winter 2013 Cal Poly, Team 17-19, Forte Winter 2013 회원

CPSU-FORTE-W13S17G19

6 회원들

안내서 17개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 17

전체 시간: 2,090