주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

This guide will demonstrate removing the computer's processor.

부품

지정된 부품이 없습니다.

  1. Place the case on its side.
    • Place the case on its side.

    • Locate and remove the two 13.1 mm thumbscrews.

  2. Slide the side panel towards the back and remove.
    • Slide the side panel towards the back and remove.

  3. Locate the processor's heat sink and fan.
    • Locate the processor's heat sink and fan.

  4. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  5. Remove the fan's power cable from the motherboard.
    • Remove the fan's power cable from the motherboard.

  6. Locate and unscrew the four Phillips #0 screws at the corners of the fan.
    • Locate and unscrew the four Phillips #0 screws at the corners of the fan.

    • The screws will not come out completely.

  7. Remove the fan and heat sink.
    • Remove the fan and heat sink.

  8. Gently press down and release the silver lever.
    • Gently press down and release the silver lever.

  9. Open the metal casing over the processor.
    • Open the metal casing over the processor.

  10. Gently lift up the processor, holding by the edges only.
    • Gently lift up the processor, holding by the edges only.

결론

To reassemble your device, follow these instructions in reverse order.

Note: For reassembly on step seven, make sure the corner of the processor with the gold triangle is pointing towards the release lever.

다른 11명이 해당 안내서를 완성하였습니다.

James Aldag

회원 가입일: 2011년 10월 20일

357 평판

안내서 3개 작성하였습니다

Cal Poly, Team 6-8, Regan Fall 2011 Cal Poly, Team 6-8, Regan Fall 2011 회원

CPSU-REGAN-F11S6G8

4 회원들

안내서 18개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 36

전체 시간: 7,406