소개

Need to get inside the amp? Remove the back panel!

Be sure to unplug the device before proceeding.
  • Be sure to unplug the device before proceeding.

  • Use a Phillips #0 screwdriver to remove the four 21.7mm screws holding the back panel to the frame.

댓글 쓰기

Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.
  • Once the screws are out, use a plastic opening tool or spudger to pry the top of the back panel open. There may be some resistance, but it will eventually pry loose.

댓글 쓰기

  • Once the top is separated, use your hand to remove the back panel from the unit.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Greg Sawers

회원 가입일: 2012년 09월 27일

71 평판

안내서 3개 작성하였습니다

Cal Poly, Team 24-30, Regan Fall 2012 Cal Poly, Team 24-30, Regan Fall 2012 회원

CPSU-REGAN-F12S24G30

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 10

지난 30일: 50

전체 시간: 3,719