소개

Removing front panel to replace main LCD or small display screen.

부품

부품은 필요하지 않습니다.

  1. Using the plastic opening tool, pry off the top faceplate.
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

  2. Using the T6 Torx Screwdriver remove all 4 small screws.
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove silver plate from phone.
    • Remove silver plate from phone.

  5. Using the spudger remove the plastic camera casing
    • Using the spudger remove the plastic camera casing

  6. Using the iPod Opening Tool remove the yellow flex cable from the green logic board.
    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

  7. Use Spudger or hands to detach flex cable from front screen logic board
    • Use Spudger or hands to detach flex cable from front screen logic board

결론

To reassemble your device, follow these instructions in reverse order.

Cecilia

회원 가입일: 2010년 04월 11일

1 평판

안내서 3개 작성하였습니다

Cal Poly, Team 27-96, Amido Spring 2010 Cal Poly, Team 27-96, Amido Spring 2010 회원

CPSU-AMIDO-S10S27G96

4 회원들

안내서 15개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,802