소개

This guide will show you how to remove a PCI card on your HP Compaq dx2000MT.

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

댓글 쓰기

Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

댓글 쓰기

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

댓글 쓰기

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

it’s useless my friends

bisous sur les fesses de ta mamaa

Albert einstein - 답글

  • Remove the Torx T15 screwdriver holding the PCI card in place.

댓글 쓰기

  • Remove the PCI card by pulling it out towards the side of the device.

  • Be careful about touching the top and bottom of the card! The static electricity in your fingers could short it. If you can, only touch the metal bracket and the sides of the card.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Logan Pace

회원 가입일: 2011년 10월 12일

2,020 평판

안내서 9개 작성하였습니다

Cal Poly, Team 17-16, Regan Fall 2011 Cal Poly, Team 17-16, Regan Fall 2011 회원

CPSU-REGAN-F11S17G16

4 회원들

안내서 17개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 5

지난 30일: 55

전체 시간: 4,195