주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Removing Magellan RoadMate 1200 Back Cover

필요한 것

  1. Removing Magellan RoadMate 1200 Back Cover, Back Cover: 1 단계, 이미지 1/2 Removing Magellan RoadMate 1200 Back Cover, Back Cover: 1 단계, 이미지 2/2
    • Remove 4 rubber caps covering each screw by inserting the screwdriver into the side of cap and prying back and forth.

    • Please note: this is a tedious process, but be patient.

  2. Removing Magellan RoadMate 1200 Back Cover: 2 단계, 이미지 1/1
    • Remove the 4 screws holding the cover in place using a Phillips #00 screwdriver.

  3. Removing Magellan RoadMate 1200 Back Cover: 3 단계, 이미지 1/2 Removing Magellan RoadMate 1200 Back Cover: 3 단계, 이미지 2/2
    • Open the back cover.

    • Lift the cover slowly and carefully; the speaker is screwed on the back cover and is connected to the circuit board.

  4. Removing Magellan RoadMate 1200 Back Cover: 4 단계, 이미지 1/2 Removing Magellan RoadMate 1200 Back Cover: 4 단계, 이미지 2/2
    • Disconnect the speaker from the terminal.

    • When reassembling, make sure that you plug the terminal in the same way. The black wire should be on the side farthest from the battery.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Ross Light

회원 가입일: 04/12/10

217 평판

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 3

전체 시간: 3,467