Step-by-step guide to removing your phone's back plate.
부품은 필요하지 않습니다.
Flip phone to see back cover.
Using either finger or spugder tool press button located near the top of phone by the antenna.
Pry up back plate from phone to reveal battery.
Push button near bottom of battery using either your finger of the spudger. This will release the battery.
Using a T6 Torx Screwdriver remove the four torxs on the back of the phone.
Simultaneously press indicated buttons on both sides of phone.
Separate back plate from the rest of phone.
해당 안내서 퍼가기
해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.