기기를 수리하세요 커뮤니티 상점

Removing the Jura IMPRESSA J5 brewing unit (brewgroup)

소개

These instructions tell you how to extract the brewing unit.

필요한 것

  1. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Jura Capresso IMPRESSA J5 opening procedure: 1 단계, 이미지 1/1

    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

    번역하기

  2. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 2 단계, 이미지 1/3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 2 단계, 이미지 2/3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 2 단계, 이미지 3/3

    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

    번역하기

  3. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 3 단계, 이미지 1/3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 3 단계, 이미지 2/3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 3 단계, 이미지 3/3
    이 단계에 사용된 도구:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    구매

    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

    번역하기

  4. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 4 단계, 이미지 1/1

    • Also remove the two oval head screws underneath the ground coffee compartment lid.

    번역하기

  5. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 5 단계, 이미지 1/1

    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

    번역하기

  7. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 6 단계, 이미지 1/2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 6 단계, 이미지 2/2

    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

    번역하기

  8. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 7 단계, 이미지 1/3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 7 단계, 이미지 2/3 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 7 단계, 이미지 3/3

    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

    번역하기

  9. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 8 단계, 이미지 1/1

    • Remove the Torx T15 screw on the side panel with the water tank.

    번역하기

  10. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 9 단계, 이미지 1/2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 9 단계, 이미지 2/2

    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

    번역하기

  11. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 10 단계, 이미지 1/1

    • Pull the left side panel slightly towards the back and remove it.

    번역하기

  12. Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 11 단계, 이미지 1/2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup), Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 11 단계, 이미지 2/2

    • The brewing unit is on the left side of the machine.

    번역하기

  13. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 12 단계, 이미지 1/2 Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 12 단계, 이미지 2/2

    • The cover over the brewing unit is only lightly gripped. Lift it out.

    번역하기

  14. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 13 단계, 이미지 1/1

    • In this image the brewing unit has been removed already to show you how it is connected.

    • Two Torx T15 machine screws

    • One Torx T15 screw

    • The hot water connection is plugged in.

    • The hose for the coffee spout is connected above.

    번역하기

  15. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 14 단계, 이미지 1/1

    • Unscrew the two Torx T15 machine screws.

    • Unscrew the lower Torx T15 screw near the hot water inlet pipe.

    • Pull off the coffee dispensing pipe.

    번역하기

  16. Removing the Jura IMPRESSA J5 brewing unit (brewgroup): 15 단계, 이미지 1/1

    • First pull the brewing unit outward slightly at the base, lift it out with a downward motion.

    • If you want to disassemble the brewing unit for maintenance or cleaning, use these oder these instructions.

    번역하기
결론

Work your way through the instructions in reverse to re-assemble the device.

다른 한 분이 해당 안내서를 완성하였습니다.

다음 번역가들에게 특별히 감사 드립니다:

de en

100%

jana°

VauWeh

이 번역자 분들은 저희가 세상을 수리하는데 동참해 주시는 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

VauWeh

회원 가입일: 10/19/15

201,568 평판

안내서 246개 작성하였습니다

배지: 44

배지 +41개 더

팀

Repair is War on Entropy Repair is War on Entropy 회원

Community

24 회원들

안내서 1,097개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 4

7일 전: 14

30일 전: 76

전체 시간: 4,653