주요 콘텐츠로 건너뛰기

소개

From use and abuse, the bottoms of the mouse buttons can wear down and become unable to click the digital buttons inside the mouse.

  1. Repair Mouse Buttons, Engage Wired Optical Mouse Top and Outer Shell Removal: step 1, image 1 of 1
    • Flip the mouse over and peel off the stickers on the perimeter of the bottom of the mouse.

  2. Repair Mouse Buttons: step 2, image 1 of 1
    • Use the Phillips #1 screwdriver to remove four 5 mm screws from the bottom of the mouse.

    • Use the Phillips #1 screwdriver to remove the two 9 mm screws from the bottom of the mouse.

  3. Repair Mouse Buttons: step 3, image 1 of 3 Repair Mouse Buttons: step 3, image 2 of 3 Repair Mouse Buttons: step 3, image 3 of 3
    • Grab the top shell of the mouse and lift up to remove.

  4. Repair Mouse Buttons: step 4, image 1 of 1
    • The capacitors on this board can release stored electrical energy if touched.

    • Touch your capacitor discharge tool to the capacitor leads on the board to release the stored energy. If leads are inaccessible, wait until you've removed the board from the mouse body.

  5. Repair Mouse Buttons: step 5, image 1 of 2 Repair Mouse Buttons: step 5, image 2 of 2
    • Use a spudger to pry underneath the white plug and pop it out to disconnect the upper board from the lower board.

  6. Repair Mouse Buttons, Top Shell: step 6, image 1 of 1
    • Remove the 5 mm round head screw holding the middle piece to the top piece.

    • The outermost shell will now separate from the middle structure.

  7. Repair Mouse Buttons, Repair Mouse Buttons: step 7, image 1 of 2 Repair Mouse Buttons, Repair Mouse Buttons: step 7, image 2 of 2
    • Take the plastic buttons (the part that your fingers click) and flip them over.

    • On the bottom, there should be little plastic towers. Wearing these down can prevent the buttons from clicking properly.

  8. Repair Mouse Buttons: step 8, image 1 of 2 Repair Mouse Buttons: step 8, image 2 of 2
    • File the bottoms of these towers flat to remove any ridges that prevent proper clicking.

    • Make sure to file down both towers. In this image, one is left un-filed to show the difference.

    • This process can also be used for the other buttons on the mouse. Use other guides to disassemble the mouse until the desired button is accessible, and then perform the same filing technique.

결론

To reassemble your device, follow these instructions in reverse order.

다른 17명이 해당 안내서를 완성하였습니다.

David

회원 가입일: 2013년 01월 16일

983 평판

안내서 4개 작성하였습니다

Cal Poly, Team 18-36, Regan Winter 2013 Cal Poly, Team 18-36, Regan Winter 2013 회원

CPSU-REGAN-W13S18G36

3 회원들

안내서 19개 작성하였습니다

댓글 14개

Thanks, worked like a charm.

Michael Beckman - 답글

What if my gaming mouse doesnt have screws??

k2snakalle123 - 답글

yep no screws……….so am screwed

Nav Dugal -

Really a great help!

Aman Kashyap - 답글

댓글 쓰기

조회 통계:

24 시간 전: 35

7일 전: 237

30일 전: 955

전체 시간: 105,268