주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Canon "E-18 error" happens when the lens gets stuck in the extended position. The LCD will display a little E-18 in the lower-left corner and start beeping.

부품

지정된 부품이 없습니다.

  1. Place camera lens facing upwards on the table.
    • Place camera lens facing upwards on the table.

    • Press and hold down the power button.

    • Simultaneously press down the shutter button.

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    키트 쇼핑하기

    Enough RAM
    For All The Tabs

    키트 쇼핑하기
  3. Replace the batteries in the camera.
    • Replace the batteries in the camera.

    • To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.

    • Remove the old batteries from the camera and wait a few moments.

    • Put in a fresh set of batteries.

    • Close battery slide and power camera back on.

  4. Put blow dryer in the "no heat" setting prior to plugging it in.
    • Put blow dryer in the "no heat" setting prior to plugging it in.

    • Plug in and turn the blow dryer on.

    • Blow air in the gaps between the lens.

결론

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Tim

회원 가입일: 2011년 01월 06일

157 평판

안내서 1개 작성함

Cal Poly, Team 7-31, Regan Winter 2011 Cal Poly, Team 7-31, Regan Winter 2011 회원

CPSU-REGAN-W11S7G31

6 회원들

안내서 12개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 18

전체 시간: 3,732