소개

Camera went completely dead - removed the front cover and found a screw loose. Replaced it and the camera worked fine. This could be a problem for others.

  1. Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”
    • Follow guide “Disassembling Canon PowerShot SD1100 IS Front and Rear Cover”

    댓글 쓰기

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and  firmly tighten it. Reposition and tighten the covers.  Problem solved!
    • Check inside camera for loose screw from this location (indicated by yellow arrow). Return the screw to location and firmly tighten it. Reposition and tighten the covers. Problem solved!

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Frank

회원 가입일: 2011년 04월 13일

25 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 682