Skip to main content

소개

Component teardown of Gateway 420GR desktop. This machine originally shipped with Windows XP.

해당 분해도는 수리 안내서가 아닙니다. Gateway 420GR 수리는 저희 서비스 설명서를 사용하십시오.

  1. The left panel of the case has thumbscrews that release the left side from the case.
    • The left panel of the case has thumbscrews that release the left side from the case.

  2. Loosen the first thumbscrew
    • Loosen the first thumbscrew

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Loosen the second thumbscrew.
    • Loosen the second thumbscrew.

  5. The side panel will now slide toward the back of the case.
    • The side panel will now slide toward the back of the case.

  6. System RAM
    • System RAM

    • USB headers for front panel USB ports.

    • CMOS battery

  7. Pair one RAM retention clips.  There are two (one on each end) for each of the available slots.
    • Pair one RAM retention clips. There are two (one on each end) for each of the available slots.

    • Pair two RAM retention clips. There are two (one on each end) for each of the available slots.

    • RAM should be paired (same size) and the machine support up to 4GB or RAM as 1GB modules in each of the 4 slots.

    • System supported RAM is 184-pin DIMM DDR PC3200

kyle23

회원 가입일: 2010년 04월 22일

182 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 2,538