주요 콘텐츠로 건너뛰기

소개

How to disassemble the laptop in case to clean the cooling / fan system.


Please SUBSCRIBE to my channel ツ

부품

지정된 부품이 없습니다.

동영상 개요

  1. Switch-off the laptop and remove the battery. Switch-off the laptop and remove the battery.
    • Switch-off the laptop and remove the battery.

  2. To remove the Keyboard you must open 7x locking clips. You can use a cutter and a plastic tool. You can use a cutter and a plastic tool.
    • To remove the Keyboard you must open 7x locking clips.

    • You can use a cutter and a plastic tool.

  3. Remove the Keyboard. Remove the HDD, RAM Memory cover. Remove the HDD, RAM Memory cover.
    • Remove the Keyboard.

    • Remove the HDD, RAM Memory cover.

  4. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  5. Remove the HDD and the DVD optical drive. Remove the HDD and the DVD optical drive. Remove the HDD and the DVD optical drive.
    • Remove the HDD and the DVD optical drive.

  6. Unscrew the screws from the upper and the bottom cases. Unscrew the screws from the upper and the bottom cases.
    • Unscrew the screws from the upper and the bottom cases.

  7. With a plastic tool you can separate the bottom case from the laptop. With a plastic tool you can separate the bottom case from the laptop. With a plastic tool you can separate the bottom case from the laptop.
    • With a plastic tool you can separate the bottom case from the laptop.

  8. Disconnect the CPU fan cable connector. Now you have 4x screws on the CPU side and 2x on the fan. Now you have 4x screws on the CPU side and 2x on the fan.
    • Disconnect the CPU fan cable connector.

    • Now you have 4x screws on the CPU side and 2x on the fan.

  9. Separate the fan from the radiator. Clean the radiator and the fan. Use a soft brush. Clean the radiator and the fan. Use a soft brush.
    • Separate the fan from the radiator.

    • Clean the radiator and the fan. Use a soft brush.

  10. Put thermal compose to the main CPU and you are ready for assembling. After the start-up, check if the fan works. .
결론

To reassemble your device, follow these instructions in reverse order.

다른 11명이 해당 안내서를 완성하였습니다.

ZFix

회원 가입일: 2013년 12월 09일

166,266 평판

안내서 305개 작성하였습니다

Master Techs Master Techs 회원

Community

287 회원들

안내서 819개 작성하였습니다

Very good, thank you. :-)

andymcleod - 답글

I' thank you too. :)

ZFix -

Absolutely awesome job!

Thanks a plenty.

SolaJ

SolarJ - 답글

Can't you just leave fan assembly installed and start cleaning it with brush and compressed air once you have bottom case cover off? What about just blowing air thru the grill covering the fan and not even removing the bottom case cover?

bikeboatski - 답글

I just red it and found it's not for me. But i still felt I'd instantly send $1 to the author, besides those points, which i do not care of.

So I suggest to FIXIT.COM to offer it optionally. I meean... Optinally if you want you may send $1 or more to the author.... and I would put "1" ass default. I want it tobe JUST ONE CLICK. Otherwise I leave.

Jon Pol - 답글

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 36

지난 30일: 143

전체 시간: 27,691