주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

If your paint brush bristles have been rendered useless due to hard coats of paint or have lost their softness and original shape, this guide will help you repair the bristles.

  1. Identify the brush type and the level of damage: If the brush hairs are inflexible due to hardened paint coats, proceed to Step 2.
    • Identify the brush type and the level of damage:

    • If the brush hairs are inflexible due to hardened paint coats, proceed to Step 2.

    • If the brush hairs are synthetic (fraying bristles), proceed to Step 5.

  2. Fill a small cup half way with turpentine. Soak the brush in the turpentine for 2 days.
    • Fill a small cup half way with turpentine.

    • Soak the brush in the turpentine for 2 days.

    • CAUTION: Do this in a well-ventilated area. The fumes from turpentine are toxic.

  3. Remove any amount of paint that may remain on  the brush by moving the brush in a circular motion.
    • Remove any amount of paint that may remain on the brush by moving the brush in a circular motion.

  4. Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기

    Nintendo Switch 키트

    게임으로 돌아가기 위한 빠른 해결책

    Nintendo Switch 키트 쇼핑하기
  5. To remove remnants of turpentine on the bristles, wash the brush thoroughly in water. After the turpentine has been completely removed, proceed to Step 7.
    • To remove remnants of turpentine on the bristles, wash the brush thoroughly in water.

    • After the turpentine has been completely removed, proceed to Step 7.

  6. For synthetic brushes, boil a pot of water.
    • For synthetic brushes, boil a pot of water.

    • CAUTION: Avoid any contact with hot objects.

  7. Place the brush in the boiling water. Rotate the brush in the water for approximately 5 minutes.
    • Place the brush in the boiling water.

    • Rotate the brush in the water for approximately 5 minutes.

    • You should begin to notice that the bristles will start to come back together from the heat and water.

  8. Gently dry off the brushes using a soft towel. Stroke the brush in an upward motion and  be careful not to dig the towel through the bristles.
    • Gently dry off the brushes using a soft towel.

    • Stroke the brush in an upward motion and be careful not to dig the towel through the bristles.

  9. In order to retain the brush shape, use a brush tube or wrap the bristles in aluminum foil. Within approximately three hours, the brush bristles will be back to normal. Within approximately three hours, the brush bristles will be back to normal.
    • In order to retain the brush shape, use a brush tube or wrap the bristles in aluminum foil.

    • Within approximately three hours, the brush bristles will be back to normal.

  10. Cut off excess frayed bristles (optional). There may be a few fraying bristles left. These are harmless and will cling to the brush shape when dipped in paint.
    • Cut off excess frayed bristles (optional).

    • There may be a few fraying bristles left. These are harmless and will cling to the brush shape when dipped in paint.

    • If preferred, you may use a nail clipper to cut these hairs off.

결론

Your brushes should now be usable again. Unfortunately this cannot be done too many times because the turpentine will start to damage the bristles, so make sure to regularly wash your brushes.

다른 18명이 해당 안내서를 완성하였습니다.

Ankita Bhowmik

회원 가입일: 2015년 09월 29일

563 평판

안내서 1개 작성함

Cal Poly, Team 15-7, Green Fall 2015 Cal Poly, Team 15-7, Green Fall 2015 회원

CPSU-GREEN-F15S15G7

3 회원들

안내서 5개 작성하였습니다

Nice Information. Keep it Up.

<a href="https://www.accubrush.com/accubrush-prod...> best paint brush for cutting in </a>

<a href="https://www.accubrush.com/accubrush-prod...> cutting in paint brush </a>

aslam farooqui - 답글

Is this only for synthetic brushes? What about natural hair brushes which are frayed?

radhikacr999 - 답글

Hey! Can you tell me what is the use of wrapping the bristles in aluminium foil?

Santwana Verma - 답글

댓글 쓰기

조회 통계:

24 시간 전: 69

7일 전: 572

30일 전: 2,285

전체 시간: 70,753