소개

This is an easy guide to replacing the rear buttons on the Sanyo VPC-X1200.

  1. Remove the five case screws with a Phillips #00 Screwdriver.
    • Remove the five case screws with a Phillips #00 Screwdriver.

    • Five 3.5mm Phillips Screws

    댓글 쓰기

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Gently lift up the back cover and set aside.
    • Gently lift up the back cover and set aside.

    댓글 쓰기

    • Use small plastic pry tool to gently remove rear button plate.

    • A heat gun may be used to soften the glue for easier removal.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Anthony Giardina

회원 가입일: 2010년 04월 19일

20 평판

안내서 7개 작성하였습니다

Cal Poly, Team 7-10, Maness Spring 2010 Cal Poly, Team 7-10, Maness Spring 2010 회원

CPSU-MANESS-S10S7G10

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,328