이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.
소개
This is a guide on how to replace the touch screen on a Palm Tungsten E.
필요한 것
-
-
Remove the stylus and SD card.
-
Using a T5 torx screwdriver, remove all 4 back panel screws.
-
-
-
-
Reassemble the device in the reverse order of the tear down using the new screen in place of the old screen.
-
To reconnect the flex connector press up on the blocks with the spudger to ensure they click into place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 3명이 해당 안내서를 완성하였습니다.