주요 콘텐츠로 건너뛰기

Replacing the Metal Plate Holding the Leg of an Ironing Board

필요한 것

  1. Replacing the Metal Plate Holding the Leg of an Ironing Board, Metal plate holding the leg of the ironing board: 1 단계, 이미지 1/1
    • Place the ironing board face down on a flat, stable surface.

  2. Replacing the Metal Plate Holding the Leg of an Ironing Board: 2 단계, 이미지 1/1
    • Unscrew and remove the broken metal plate.

  3. Replacing the Metal Plate Holding the Leg of an Ironing Board: 3 단계, 이미지 1/1
    • Cut the metal sheet into an appropriate size.

    • Use cut proof gloves for protection

  4. Replacing the Metal Plate Holding the Leg of an Ironing Board: 4 단계, 이미지 1/1
    • Using a 1/8" drill bit, drill four holes on each corner where the screws will be placed.

    • Use cut proof gloves for protection

  5. Replacing the Metal Plate Holding the Leg of an Ironing Board: 5 단계, 이미지 1/1
    • On the corner of a flat edge, use a mallet to shape the metal sheet.

    • Keep your hand at a distance from the mallet to avoid hitting your fingers.

  6. Replacing the Metal Plate Holding the Leg of an Ironing Board: 6 단계, 이미지 1/1
    • Using a screwdriver, screw on the new plate with the #10-32 x 3/8" pan-headed screws.

  7. Replacing the Metal Plate Holding the Leg of an Ironing Board: 7 단계, 이미지 1/2 Replacing the Metal Plate Holding the Leg of an Ironing Board: 7 단계, 이미지 2/2
    • Finish repairing the iron board!

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Nina Youn

회원 가입일: 10/26/18

211 평판

안내서 1개 작성함

UC Davis, Team S2-G1, Bender Fall 2018 UC Davis, Team S2-G1, Bender Fall 2018 회원

UCD-BENDER-F18S2G1

4 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 27

전체 시간: 2,833