기기를 수리하세요 커뮤니티 상점

ResMed VPAP Auto 25 Blower Unit Replacement Replacement

소개

The blower unit fails when the device becomes overused and outdated. It also fails as a result of dust clogging up the intake. Replacements extend for only a certain amount of time. Replacing the blower unit will save lots of money compared to buying a whole new unit. Eventually, a full unit replacement is necessary.

필요한 것

  1. ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: 1 단계, 이미지 1/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: 1 단계, 이미지 2/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement, Blower Unit: 1 단계, 이미지 3/3

    • Remove the four 26.7 mm T3 Torx screws from the bottom side of the ResMed VPAP Auto 25.

    편집

  2. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 2 단계, 이미지 1/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 2 단계, 이미지 2/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 2 단계, 이미지 3/3

    • Flip the device over.

    • Pry the outermost plastic cover off with the metal spudger until the cover is loose and able to be removed.

    편집

  4. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 3 단계, 이미지 1/2 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 3 단계, 이미지 2/2

    • Pull off the front cover to reveal the internal components.

    편집

  5. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 4 단계, 이미지 1/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 4 단계, 이미지 2/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 4 단계, 이미지 3/3

    • Loosen the motherboard from the rubber dowels holding it in place and unplug the screen components.

    편집

  6. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 5 단계, 이미지 1/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 5 단계, 이미지 2/3 ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 5 단계, 이미지 3/3

    • Remove the three 26.7 mm T3 Torx screws from the now visible rubber fan motor cover.

    • Lift off the rubber fan motor cover, revealing the fan motor.

    편집

  7. ResMed VPAP Auto 25 Blower Unit Replacement Replacement: 6 단계, 이미지 1/1

    • Unplug the blower unit cable.

    • Remove the fan motor blower unit.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

댓글 한 개

where can we get a new motor?

ed allen - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 307