주요 콘텐츠로 건너뛰기

Respironics REMstar Plus M Series Power Supply Circuit board Replacement

필요한 것

  1. Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: 1 단계, 이미지 1/3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: 1 단계, 이미지 2/3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: 1 단계, 이미지 3/3
    • Place the device face down.

    • Use a T15 Torx screwdriver to remove the six screws in the base plate.

    • Lift the base plate off of the device.

  2. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 2 단계, 이미지 1/3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 2 단계, 이미지 2/3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 2 단계, 이미지 3/3
    • Flip the circuit board over to the right.

    • Gently pull the ribbon cable outward to disconnect it from the circuit board.

  3. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 3 단계, 이미지 1/2 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: 3 단계, 이미지 2/2
    • Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.

    • Remove the circuit board.

결론

To reassemble your device, follow these instructions in reverse order.

Brent Forrest

회원 가입일: 09/17/20

173 평판

안내서 2개 작성하였습니다

댓글 2개

My unit stops working in the middle of the night, then beeps, & blue light flashes. Will replacing this board fix this, and where can I get one?

mert454 - 답글

Where to find a power supply circuit board for my Remstar plus m series which just blinks blue lights. dledes@shaw.ca

David Edes - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 19

전체 시간: 984