Revlon 473 Thermal Cutout Replacement - iFixit 수리 안내서

필요한 것

1 단계 Shell

Revlon 473 Thermal Cutout Replacement, Shell: 1 단계, 이미지 1/1

Before disassembly, make sure that the device is unplugged.
Remove the two 17.83 mm black screws located on the handle.

2 단계

Revlon 473 Thermal Cutout Replacement: 2 단계, 이미지 1/1

Separate the shell from the main component.
Check to ensure each piece is free from debris.

3 단계

Revlon 473 Thermal Cutout Replacement: 3 단계, 이미지 1/3

Revlon 473 Thermal Cutout Replacement: 3 단계, 이미지 2/3

Revlon 473 Thermal Cutout Replacement: 3 단계, 이미지 3/3

Remove the casing from the heating element.
For reassembly, reattach the silver casing before the black cover.

4 단계 Thermal Cutout

Revlon 473 Thermal Cutout Replacement, Thermal Cutout: 4 단계, 이미지 1/1

Locate the thermal cutout under the coils of the heating element.

5 단계

Revlon 473 Thermal Cutout Replacement: 5 단계, 이미지 1/1

Test the thermal cutout for continuity using the multimeter.
Make sure the multimeter is set to 200 ACV and bring the probes toward the thermal cutout.
If the numbers on the multimeter continue to change, the circuit is closed and properly functioning.
If the multimeter reads a consistent number, the circuit is opened and the thermal cutout needs to be replaced.

6 단계

Revlon 473 Thermal Cutout Replacement: 6 단계, 이미지 1/1

To replace the thermal cutout, use the spudgers to extract the object.
To remove, wedge it back and forth until it comes free.
You do not need to take out the gold piece, only the thermal cutout.

7 단계

Revlon 473 Thermal Cutout Replacement: 7 단계, 이미지 1/1

Replace the old thermal cutout with a new thermal cutout by snapping it into place.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Jessica Leyva

회원 가입일: 09/18/12

143 평판

안내서 5개 작성하였습니다

배지 +5개 더

팀

Cal Poly, Team 1-5, Propen Fall 2012 Cal Poly, Team 1-5, Propen Fall 2012 회원

CPSU-PROPEN-F12S1G5

3 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 1,857