기기를 수리하세요 커뮤니티 상점

Ricoh Shotmaster 130Z Zooming Lens Replacement

소개

If the zooming lens of your Ricoh Shotmaster 130Z camera is broken or malfunctioning, this guide will show you how to replace it step-by-step.

필요한 것

  1. Ricoh Shotmaster 130Z Zooming Lens Replacement, Zooming Lens: 1 단계, 이미지 1/1

    • Set the dials to "A" (Auto), and Off mode.

    • You will not be able to move these dials once the case has been opened.

    번역하기

  2. Ricoh Shotmaster 130Z Zooming Lens Replacement: 2 단계, 이미지 1/3 Ricoh Shotmaster 130Z Zooming Lens Replacement: 2 단계, 이미지 2/3 Ricoh Shotmaster 130Z Zooming Lens Replacement: 2 단계, 이미지 3/3

    • Remove the 5 Phillips screws from the sides and the back.

    번역하기

  4. Ricoh Shotmaster 130Z Zooming Lens Replacement: 3 단계, 이미지 1/2 Ricoh Shotmaster 130Z Zooming Lens Replacement: 3 단계, 이미지 2/2

    • Remove the 5mm JIS #00 screws from the bottom of the camera.

    • Pay attention to the 6mm screws on the sides of the tripod slot, as they are a slightly different size from the rest of the screws. However, you still may use a J00 screwdriver to remove them.

    번역하기

  5. Ricoh Shotmaster 130Z Zooming Lens Replacement: 4 단계, 이미지 1/2 Ricoh Shotmaster 130Z Zooming Lens Replacement: 4 단계, 이미지 2/2

    • Using an opening tool, lift the case of the tripod slot (on the bottom) until the back portion of the case is released.

    • Continue to use the the opening tool to insert it and lift right next to the strap of the camera.

    • This will release the front portion of the case.

    번역하기

  6. Ricoh Shotmaster 130Z Zooming Lens Replacement: 5 단계, 이미지 1/3 Ricoh Shotmaster 130Z Zooming Lens Replacement: 5 단계, 이미지 2/3 Ricoh Shotmaster 130Z Zooming Lens Replacement: 5 단계, 이미지 3/3

    • Use a JIS #0 screwdriver to remove the three marked screws found around the perimeter of the lens.

    번역하기

  7. Ricoh Shotmaster 130Z Zooming Lens Replacement: 6 단계, 이미지 1/3 Ricoh Shotmaster 130Z Zooming Lens Replacement: 6 단계, 이미지 2/3 Ricoh Shotmaster 130Z Zooming Lens Replacement: 6 단계, 이미지 3/3
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Proceed to remove the two screws using a JIS #00 screwdriver.

    • Use tweezers to lift the lens off of the board.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 13명과 함께

anna carolina von einem

회원 가입일: 10/19/16

450 평판

안내서 4개 작성하였습니다

배지: 8

배지 +5개 더

팀

UMass Dartmouth, Team 3-4, Isaacson Fall 2016 UMass Dartmouth, Team 3-4, Isaacson Fall 2016 회원

UMASSD-ISAACSON-F16S3G4

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 16

전체 시간: 532