Ridgid Brushless R86040 Guard Replacement - iFixit 수리 안내서

소개

With this guide, you will be able to remove, replace, and/or change the position of the guard on your Ridgid Brushless R86040. You should replace the guard anytime it becomes bent or damaged as this is a safety hazard. Users may also wish to rotate the guard to its various positions for different cutting and grinding angles. Before you begin, make sure the power is off, the battery is not attached to the device, and the cutting blade has been removed.

1 단계 Guard

Ridgid Brushless R86040 Guard Replacement, Guard: 1 단계, 이미지 1/1

Identify the silver lever behind by where the guard and blade are located.

2 단계

Ridgid Brushless R86040 Guard Replacement: 2 단계, 이미지 1/2

Ridgid Brushless R86040 Guard Replacement: 2 단계, 이미지 2/2

While pressing the lever, spin the guard clockwise. The teeth holding it together will line up and the guard will detach from the rest of the device.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Lucas Fraser

회원 가입일: 09/17/19

133 평판

안내서 1개 작성함

배지 +3개 더

팀

Embry-Riddle Aeronautical University, Team S22-G7, Branham Fall 2019 Embry-Riddle Aeronautical University, Team S22-G7, Branham Fall 2019 회원

ERAU-BRANHAM-F19S22G7

3 회원들

안내서 2개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 140