기기를 수리하세요 커뮤니티 상점

Ridgid Circular Saw R3205 Spindle Lock Replacement

소개

The Spindle Lock on a circular saw is one of the most commonly replaced items. The Spindle Lock wears down due to regular blade replacements. Replacing the Spindle Lock is very moderately easy and doesn’t require any complicated methods.


필요한 것

  1. Ridgid Circular Saw R3205 Spindle Lock Replacement, Blade: 1 단계, 이미지 1/2 Ridgid Circular Saw R3205 Spindle Lock Replacement, Blade: 1 단계, 이미지 2/2

    • Press the black spindle lock and hold it down.

    • While keeping the spindle lock pressed down use a 6mm allen wrench to remove the 5/16-18 x 0.55 inch screw.

    편집

  2. Ridgid Circular Saw R3205 Spindle Lock Replacement: 2 단계, 이미지 1/1

    • Release the spindle lock and remove the outer flange by lifting it off the output shaft.

    편집

  3. Ridgid Circular Saw R3205 Spindle Lock Replacement: 3 단계, 이미지 1/3 Ridgid Circular Saw R3205 Spindle Lock Replacement: 3 단계, 이미지 2/3 Ridgid Circular Saw R3205 Spindle Lock Replacement: 3 단계, 이미지 3/3

    • With the outer flange removed retract the lower blade guard into the upper blade guard housing by pushing on the black lever.

    • Slide the blade out of from the bottom of the saw.

    편집

  4. Ridgid Circular Saw R3205 Spindle Lock Replacement, Lower Blade Guard: 4 단계, 이미지 1/2 Ridgid Circular Saw R3205 Spindle Lock Replacement, Lower Blade Guard: 4 단계, 이미지 2/2

    • Use a prying tool or your fingers to remove the inner flange.

    편집

  6. Ridgid Circular Saw R3205 Spindle Lock Replacement: 5 단계, 이미지 1/3 Ridgid Circular Saw R3205 Spindle Lock Replacement: 5 단계, 이미지 2/3 Ridgid Circular Saw R3205 Spindle Lock Replacement: 5 단계, 이미지 3/3

    • Remove the external retaining ring with a screwdriver by expanding it and then prying it out.

    편집

  7. Ridgid Circular Saw R3205 Spindle Lock Replacement: 6 단계, 이미지 1/1

    • After removing the external retaining ring, remove (OD50 x ID42 x 0.8t) washer.

    편집

  8. Ridgid Circular Saw R3205 Spindle Lock Replacement: 7 단계, 이미지 1/2 Ridgid Circular Saw R3205 Spindle Lock Replacement: 7 단계, 이미지 2/2

    • Remove the lower blade guard after removing the washer.

    편집

  9. Ridgid Circular Saw R3205 Spindle Lock Replacement, Spindle Lock: 8 단계, 이미지 1/1

    • Remove the (M3 x 12 mm) screw using a phillips head screwdriver.

    편집

  10. Ridgid Circular Saw R3205 Spindle Lock Replacement: 9 단계, 이미지 1/1

    • Leave the rubber dust cover below the removed screw.

    편집

  11. Ridgid Circular Saw R3205 Spindle Lock Replacement: 10 단계, 이미지 1/3 Ridgid Circular Saw R3205 Spindle Lock Replacement: 10 단계, 이미지 2/3 Ridgid Circular Saw R3205 Spindle Lock Replacement: 10 단계, 이미지 3/3

    • Pull out the Spindle Lock.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Joshua Caron

회원 가입일: 04/05/19

792 평판

안내서 5개 작성하였습니다

배지: 11

배지 +8개 더

팀

UMass Dartmouth, Team S5-G2, Julie Spring 2019 UMass Dartmouth, Team S5-G2, Julie Spring 2019 회원

UMASSD-JULIE-S19S5G2

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 9

30일 전: 17

전체 시간: 1,489