기기를 수리하세요 커뮤니티 상점

Ridgid R350RHE 2012 545X25 O-Ring Replacement

소개

O-Rings are prone to wearing out due to generally wear and tear during operation and worsened by a lack of lubrication or improper oil. O-rings maintain proper seals through out the nail gun and leaks make the gun prone to misfires, jams, and lack of power needed for the fasteners to reach proper depth. O-Rings are disposable once they have deteriorated to the point of effecting the nail guns operation and will need to replaced with new O-rings.

필요한 것

  1. Ridgid R350RHE 2012 545X25 O-Ring Replacement, 545X25 O-Ring: 1 단계, 이미지 1/2 Ridgid R350RHE 2012 545X25 O-Ring Replacement, 545X25 O-Ring: 1 단계, 이미지 2/2

    • Remove the 25 mm hex screws on the butt cap with a 3/16" Allen wrench.

    • Remove the screws in a cross pattern to apply even pressure when removing and securing the top cap.

    • Remove the cap by pulling it parallel to the device.

    번역하기

  3. Ridgid R350RHE 2012 545X25 O-Ring Replacement: 2 단계, 이미지 1/2 Ridgid R350RHE 2012 545X25 O-Ring Replacement: 2 단계, 이미지 2/2

    • Remove the top 545 X 25 O-Ring from the Ridgid Cylinder with a pry tool.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Brandon Daniels

회원 가입일: 02/08/24

103 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

University of North Texas, Team 3-2, Kilpatrick Spring 2024 University of North Texas, Team 3-2, Kilpatrick Spring 2024 회원

UNT-KILPATRICK-S24S3G2

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 11

30일 전: 12

전체 시간: 64